HI-TECH Software Forums: change linker options

Hi,

When i compile my project i get:

Error #491: C:\Programme\HI-TECH Software\PICC-18\STD\9.51\lib\pic86l-c.lib(wmul.obj); 0: can't find 0x1A8 words for psect "data" in segment "RAM"

Therefore i tried to add a RAM Range using the project properties in HI-TIDE 3.15pl2. But nothing changes.

Code:

 Linker command line:

--edf=C:\Programme\HI-TECH Software\PICC-18\STD\9.51\dat\en_msgs.txt \
  --emax=10 -cs -h+test_std_2.sym -z --norlf -Q18F458 -Mtest_std_2.map -E1 \
  -ACODE=00h-03FFFhx2 -ALOWCODE=00h-03FFFhx2 -ARAM=00h-0FFhx6 \
  -ABIGRAM=00h-05FFh -ACOMRAM=00h-05Fh -ANVRAM=0500h-05FFh \
  -preset_vec=00h,intcode,intcodelo,powerup,init,end_init \
  -plowtext=end_init -pramtop=0600h -ACONFIG=0300000h-030000Dh \
  -pconfig=CONFIG -AIDLOC=0200000h-0200007h -pidloc=IDLOC \
  -AEEDATA=0F00000h-0F000FFh -peeprom_data=EEDATA -pconst=end_init+0600h \
  -ptemp=COMRAM,nvrram=COMRAM,nvbit=COMRAM,rbss=COMRAM,rbit=COMRAM,rdata=COMRAM \
  -pstruct=COMRAM -pnvram=-NVRAM -AFARRAM=00h-00h \
  -pfarbss=FARRAM,fardata=FARRAM \
  -pintsave_regs=BIGRAM,bigbss=BIGRAM,bigdata=BIGRAM -pparam=RAM -pdata=RAM \
  -pidata=CODE,irdata=CODE,ibigdata=CODE,ifardata=CODE startup.obj tmr.obj \
  starttest.obj main.obj led_modul.obj irq.obj io.obj eeprom.obj \
  default_table.obj can18xx8.obj can.obj ad.obj \
  C:\Programme\HI-TECH Software\PICC-18\STD\9.51\lib\pic84--p.lib \
  C:\Programme\HI-TECH Software\PICC-18\STD\9.51\lib\pic093pm.lib \
  C:\Programme\HI-TECH Software\PICC-18\STD\9.51\lib\pic86l-c.lib

I find this commandline in the map file. Is there a way to manipulate this, like it was in the old HI-TIDE 1.2? I tried several options the project properties provide. But without success.

Thanks in advance
Martin



	You are not logged in. [Login]			Main Index \| Search \| Active Topics \| New user \| Who's Online \| FAQ